|
Journal Papers
- M. J. Rust
and C. H. Ahn, "Nanoparticle assemblies on
nanoinjection molded polymer templates," IEEE Transactions on Nanotechnology,
submitted for publication.
- M. J. Rust, J. Do,
S. H. Lee, and C. H. Ahn, "Nanoinjection lithography for
submicrometer electrodes on polymer substrates," IEEE Transactions on Nanotechnology,
vol. 6, no. 4, pp. 460-464, July 2007.
- Z. Zou, J.
Kai, M.J. Rust,
J. Han, and C.H. Ahn, "Functionalized nano interdigitated
electrodes arrays on polymer with integrated microfluidics for direct
bio-affinity sensing using impedimetric measurement," Sensors and Actuators A: Physical,
vol. 136, no. 2, pp. 518-526, May 2007.
Conference Posters and Proceedings
- A. W.
Browne, W. Jung, S. H. Lee, M.
J. Rust and C. H. Ahn, "Monolithic fabrication of
novel microfluidic components with fixed aspect ratio rounded
microlfuidic channels by a new rapid molding method," The 12th International Conference on
Miniaturized Systems for Chemistry and Life Sciences (uTAS 2008),
San Diego, CA, October 12-16, 2008 (accepted).
- M. J. Rust and C. H.
Ahn, "Assembly of nanoparticles and nanoelectrodes on nanoinjection
molded polymer templates," in Proceedings
of the 8th IEEE Conference on Nanotechnology, Arlington, TX,
August 18-21, 2008, pp. 151-154.
- J. S.
Shim, M. J. Rust,
and C. H. Ahn, "Interdigitated array electrodes with nano gaps
using optical lithography and controlled undercut method," in Proceedings of the 8th IEEE Conference on
Nanotechnology, Arlington, TX, August 18-21, 2008, pp. 851-854.
- J. S.
Shim, Y.-H. Yun, M. J. Rust
, J. Do, V. Shanov, M. J. Schulz, C. H. Ahn, “High precision
fluidic alignment of carbon nanotubes using magnetic attraction on a
metal catalyst,” in Proceedings
of The 21 st IEEE International Conference on Micro Electro Mechanical
Systems (MEMS 2008), Tucson,
AZ, January 13-17, 2008,
pp. 729-732.
- A.K.
Samarao, M.J. Rust,
C.H. Ahn, "Rapid fabrication of a nano interdigitated array
electrode and its amperometric characterization as an electrochemical
sensor," in Proceedings of
the 6th IEEE Conference on Sensors, Atlanta, GA, October
28-31, 2007, pp. 644-647.
- J. S.
Shim, I. Nikcevic, M.J. Rust,
A.S. Bhagat, W.R. Heineman, C.J. Seliskar, C.H. Ahn, and I. Papautsky,
"Simple passive micromixer using recombinant multiple flow
streams," in Proceedings of
SPIE Microfluidics, BioMEMS, and Medical Microsystems V,
vol. 6465, San Jose, CA, January 20-25, 2007, p. 64650Y.
- M. J. Rust, J. Do,
S.H. Lee, C.H. Ahn, “High
throughput fabrication of nanoelectrodes on polymer using nanoinjection and trench filling techniques,” in Proceedings
of the 6th IEEE Conference on Nanotechnology, Cincinnati,
OH, July 16-20, 2006, vol. 2, pp. 573-575.
- M. Liu, M.
J. Rust, S. Devarakonda, R. Banerjee, C.H. Ahn, “Estimation of filling time of blood and water in
microchannels,” presented at the
2006 Summer Bioengineering Conference, Amelia Island, FL, June 21-25,
2006.
- Z. Zou, J.
Kai, M. J. Rust, C.H. Ahn, “A
nano interdigitated electrode array on polymer for disposable
impedimetric biosensors,” in Technical Digest of the 12th Solid State Sensor, Actuator and
Microsystems Workshop, Hilton Head Island, SC, June 4-8,
2006, pp. 148-151.
- M. J. Rust, C. Gao,
C.H. Ahn, “A hydrogel-based
nanobiosensor for rapid pH measurement,” in Proceedings of the 9th World Congress on
Biosensors, Toronto, Canada, May 10-12, 2006, pp. 354.
- Z. Zou, J.
Kai, M. J. Rust, C.H. Ahn, “A
polymer impedimetric biosensor integrated with nano interdigitated
electrodes array (nIDA) and microchannels,” in Proceedings of the 9th World Congress on
Biosensors, Toronto, Canada, May 10-12, 2006, pp. 333.
- M. J. Rust, Z. Zou,
C.H. Ahn, “Nanowires and
nanochannels for lab-on-a-chip," presented at the 2006 Ohio
Nanotechnology Summit, Columbus,
OH, April 4-5, 2006.
- Z. Zou, M.
J. Rust, C.H. Ahn, “Nano interdigitated
electrodes array (nIDA) as biosensors for lab-on-a-chip,” presented at the 2006 Ohio Nanotechnology Summit, Columbus,
OH, April 4-5, 2006.
- J. Do, M.J. Rust, C.H. Ahn,
"Electroplated permalloy microarrays embedded into polymer
substrate for disposable lab-on-a-chips," in Abstracts of the 50th Annual Conference on
Magnetism and Magnetic Materials, San Jose, CA, USA, Oct. 30-Nov. 3, 2005,
p.306.
- M. J. Rust, S.
Subramaniam, C.H. Ahn, “Fabrication of
nanochannels with microfluidic interface using PDMS
casting on Si/Ti nanomold,” in Proceedings of the 2005 NSTI Nanotechnology
Conference (Nanotech 2005), Anaheim, CA, May 8-12, 2005,
vol. 2, pp 463-466.
- M. J. Rust, X. Zhu,
and C.H. Ahn, “Nanostructures and
nanobiosensors for lab-on-a-chip,” presented at the
2005 Ohio Nanotechnology Summit, Dayton,
OH, March 2-3, 2005.
Magazine Articles
- M.J. Rust, K.C.
Davis, C.H. Ahn, "It's a nano world after all," IEEE Potentials, vol. 26, no.5,
pp.11-15, September/October 2007.
Education
- M.J. Rust, B.D.
Richardson, K.C. Davis, S.W. Soled, P. Heckel, “Introducing electrical and computer engineering to high school
math and science students,” presented at the 36th
ASEE/IEEE Frontiers in Education Conference, San Diego, CA,
October 28-31, 2006.
- M.J. Rust, S.W.
Soled, “The effect of engineering design
activities on student learning and attitudes in secondary high school
science classes,” presented at the 2006 AERA Conference, San Francisco,
CA, April 7-11, 2006.
- M.J Rust, B.D.
Richardson, J. Allen, M.L. Daniel, “Why
do we need to know this: Making science and math relevant,” presented at
the 2006 SECO Conference, Akron,
Ohio, February 16-18, 2006.
- B.V.
Bowling, M.J. Rust,
“Getting a grip on the genome: Hands-on
genetics lessons for high school science classes,” presented at the 2006 SECO Conference, Akron, Ohio, February
16-18, 2006.
- A.
Kukreti, S. Soled, K. Obarski, B. Vice, M. J. Rust, “Project STEP: Using authentic, inquiry-based learning
activities in the context of a city theme,” presented at the NSF GK-12
Annual Conference, Arlington, VA, March 4-6, 2005.
|
